1.A connecting hyperlink of an O-ring Chain for common application is pre-coated with grease in the pins. Before connection, confirm the grease within the surfaces of pins, and if your amount of grease is little, apply grease with bare hands. (If gloves are utilised, the grease will probably be absorbed from the gloves.)
Example: Once the connecting link (I) of an O-ring chain for standard application is
shipped, O-rings are fitted with the roots in the pins. When the O-rings come loose on account of vibration in the course of transport, refit the O-rings in towards the roots on the pins.
In this instance, make sure you return the grease collected in the roots of the pins to the central surfaces with the pins, additional at portion A than at portions B shown while in the over illustration. (Portions A is worn as a result of sliding with the bushings.)
2.The chain might be most very easily connected around the teeth of the sprocket. Engage the backlinks at the two ends on the chain together with the sprocket teeth and match connecting pins. Should the sprocket can be moved, the chain can also be connected over the loosened side.
three. Connecting procedure
one.Confirm that O-rings are connected to the roots with the pins.
two.When the quantity of grease applied to the connecting pins is modest, coat the pins with grease on the central portions.
three.Insert the connecting pins to the bushings in the inner hyperlinks at each ends.
4.Verify that the grease is utilized on the complete encounter of the O-ring, and match the O-ring onto the connecting pins.
5.Insert the connecting pins to the connecting plate and when pressing the connecting plate, set up the spring clip. Verify no matter if the head (the finish with no split) of the spring clip is turned from the feeding route in the chain. (See the following illustration.)
six.Be sure to confirm the spring clip is securely fitted within the clip grooves on the connecting pins.
This completes jointing in the connecting hyperlink. Note that grease over the surfaces of connecting pins and O-rings is often eliminated for the duration of set up do the job. In this case, re-grease working with the grease around the surface from the base chain or the grease inside the polyethylene bag during which the connecting website link was contained.