Material Handling Power UNIT 2
Common Description
This electrical power unit characteristics energy up gravity down circuit. Activate the get started solenoid to start the motor to lift the machine. The lowing movement is activated through the solenoid valve with the reducing pace managed by the strain compensated movement control valve. Merchandise of this series might be widely utilized in the industry of logistic products which include fork lift, mini lift table, and so on.
Distinctive Notes
1. The duty of this power unit is S3,i.e.,30 seconds on and 270 senconds off.
2. Clean every one of the hydraulic parts concerned ahead of mounting the energy unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst,which should really also be clean and totally free of impurities, N46 hydraulic oil is encouraged .
4. Oil shifting is required just after the first one hundred operation hours,afterwards after every single 3000 hrs.
five. The power unit needs to be mounted horizontally.

Material Dealing with Energy UNIT one
General Description
This power unit is intended for the fork lift industry, consisting of very effective gear pump, DC motor, manual raise and decrease valve, tank, ect. The up and down movement are managed from the lever from the manual release valve, that’s equipped with an electric switch to activate the motor. The lowing pace is managed by the stress compensated flow control valve.
Specific Notes
one. The duty of this electrical power unit is S3, i.e. 30 seconds on and 270 senconds off.
two. Clean each of the hydraulic parts concerned prior to set up of the power unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst, which really should also be clean and free of charge of impurities, N46 hydraulic oil is encouraged .
four. Oil shifting is needed immediately after the original 100 operation hrs, afterwards after every single 3000 hrs.
5. The power unit proven is built to be mounted horizontally.