DUMP TRAILER Energy UNIT-DOUBLE ACTING
This energy unit includes a energy up energy down circuit with load holding on both A & B ports. A pressure compensatred movement handle might be additional to circuit to regulate the decent pace from the cylinder.
1. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean each of the hydraulic elements concerned just before installation of the electrical power unit.
3. Viscosity of the hydraulic oil shoud be 15~46 cst, which really should also be clean and cost-free of impurities. N46 hydraulic oil is advised.
four. The energy unit needs to be mounted horizontally.
five. Check the oil degree while in the tank soon after the preliminary running on the power unit.
6. Oil modifying is required soon after the initial 100 operation hrs, afterwards when each and every 3000 hours.
DUMP TRAILER Electrical power UNIT- SINGLE ACTING
This power unit features a power up gravity down circuit. Start the motor to extend the cylinder and activate the solenoid valve to retract the circuit. Manual override to solenoid valve could be offered if required. Also a pressure compen sated flow manage could be extra towards the circuit to regulate the descent velocity in the cylinder.
Remark: Please seek the advice of our sales engineer to the unique pump displacement, motor electrical power or tank capability.
one. This energy unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
2. Clean each of the hydraulic elements concerned ahead of set up of the electrical power unit.
three. Viscosity from the hydraulic oil shoud be 15~46 cst,which must also be clean and free of charge of impurities.N46 hydraulic oil is recommended.
four. The electrical power unit should be mounted horizontally.
five. Check the oil degree in the tank following the first working on the energy unit.
six. Oil altering is required just after the preliminary a hundred operation hrs, afterwards after every 3000 hrs.