Why Coupling Grease?
Ample lubrication is important for satisfactory gear coupling operation. Gear Coupling Grease is specifically intended for gear coupling applications to increase coupling life though dramatically reducing servicing time. Its large viscosity base oil and tackifier mix to keep the grease in area and reduce separation and it truly is in total compliance with NSI/AGMA 9001-B97 lubrication suggestions.
Coupling Grease is dark brown in color and produced that has a lithium soap/polymer thickener, which has superior resistance to oil separation when subjected to higher centrifugal forces commonly located in couplings. Bearing or basic purpose greases usually separate and eliminate effectiveness resulting from high centrifugal forces on the different substances at higher rotational speeds. These higher centrifugal forces encountered in couplings separate the base oil in the thickeners. Hefty thickeners, which have no lubrication characteristics, accumulate during the gear tooth mesh region resulting in premature coupling failure. Gear Coupling Grease is made to remarkably resistant to centrifugal separation on the oil and thickener, which enables the lubricant for being made use of for a reasonably extended period of time.
On the list of secrets to the success of Gear Coupling Grease will be the variable consistency through the entire doing work cycle of your application. The consistency of our gear coupling grease adjustments with all the working conditions. Working of the lubricant underneath actual support problems leads to the grease to come to be semi-fluid, functionally solash lubricating the wear surfaces in the coupling. Since the grease cools, it returns to the original consistency, therefore avoiding leakage.
Gear Coupling Grease is available from stock in 14 oz. cartridges, one lb. and five lb. cans.
Attributes
Minimizing of coupling put on
Resistance to water washing
Corrosion and rust safety
High load carrying abilities
Extended relubrication frequency
Use at temperatures up to 325° F
Staying in area underneath higher speeds
Resistance to centrifugal separation
Reduction in down time & servicing cost
Gear 
Coupling Grease has a consistency which overlaps the NLGI grades 0 and 1. This grease is specially formulated with a lithium/polymer thickener and fortified with corrosion, oxidation, extreme pressure, and a effective rust inhibitor additive package.
