We – EPG Team the greatest gearbox & motors , torque limiter couplings and gears manufacturing unit in China with 5 distinct branches. For much more details: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
Functions&colon
1&rpar Its novel hexagonal cross section structure features light dead weight and strong bearing capacity&semi
2&rparIts hoisting&comma luffing&comma swing&comma telescopicing and other mechanisms adopt manual proportional control and hydraulic drive&comma featuring easy and flexible operation&comma stable and reliable work&comma as well as stepless speed regulation&semi
three&rparSuch safety devices as relief valve&comma balance valve&comma hydraulic lock and brake valve are equipped to prevent oilway overload and avoid accidents due to pipe fracture&semi
4&rparIt adopts the flow saturation resistance technology&comma with the flow irrelevant to the load&comma so that the combined movements could have the stability and synchronization effectively ensured&semi
five&rparThree-axle dedicated chassis&comma broad vision&comma as well as luxurious and comfortable decorations&semi
six&rparIt adopts a FAST gearbox and a 6×4 drive plus easy and flexible hydraulic power steering&semi
7&rparSuch safety devices as torque limiter and height limit device&comma as well as a complete lighting system are equipped to ensure safe and reliable operation&comma and facilitate operation at night&semi
Complex Parameters
| Type | Ser&period of time No&time period | Item | Device | Worth |
|---|---|---|---|---|
| Wor ept functionality | one | Max&period of time rated lifting excess weight × wor ept radius | kg&periodm | 110000×3&period0 |
| two | Max&period lifting torque of standard increase | kN&periodm | 4400 | |
| 3 | Max&interval lifting torque of longest principal growth | kN&periodm | 1880 | |
| four | Max&period of time lifting height of longest primary boom | m | fifty eight&period5 | |
| 5 | Max&period of time lifThe amount of torque transmitted is fixed by the power applied by the DISC SPRING which is modified by loosening or tightening the ADJUSTMENT NUT. When wanted torque location is achieved, a Set SCREW locks the ADJUSTMENT NUT in spot.ting peak of jib | m | seventy seven&sol&lpar85&rpar | |
| Proportions | six | Define proportions &lparL×W×H&rpar | mm | 14690×3000×3890 |
| seven | Length among outriggers &lparlongitudinal × transversal&rpar | mm | 7670×7800 | |
| eight | Primary growth size &lparcompletely retracted – completely extended&rpar | m | 12&period8~fifty seven&period5 | |
| nine | Jib duration | m | 11&comma18&period6&comma&lpar26&period6&rpar | |
| ten | Primary increase angle of elevation | ° | -1&period5~eighty two | |
| 11 | Swing range | 360°continuously | ||
| Wor ept pace | twelve | Max&periodspeed of one rope on the drum of principal winch | m&solmin | one hundred fifteen |
| thirteen | Growth extension time | s | 600 | |
| fourteen | Boom derric ept up time | s | 80 | |
| 15 | Swing pace | r&solmin | ~1&period5 | |
| Mass | 16 | Total vehicle kerb mass | kg | 54705 |
| seventeen | Entrance axle load | kg | 19900 | |
| 18 | Rear axle load | kg | 35000 | |
| Touring | 19 | Max&period traveling velocity | km&solh | 78 |
| 20 | Max&period of time gradeability | &percnt | 40 | |
| 21 | Min&period of time change radius | m | 11&period5 | |
| 22 | Min&time period ground clearance | mm | 280 |
The use of first tools manufacturer’s (OEM) portion numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating merchandise use and compatibility. Our firm and the listed substitution areas contained herein are not sponsored, accredited, or created by the OEM.
