Consisting of the strain balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this energy unit is created to operate materials managing gear. The decreasing movement is achived by the solenoid valve with all the decreasing speed managed by an adjustable needle valve. The left and right functions are outfitted with a dual pilot operated examine valve and cross-over relief valves.
Remark: Please talk to our revenue engineer to the diverse pump displacement, motor electrical power or tank capability.
one. This electrical power unit is of S3 duty cycle, i.e.,non-continuous operation,30 seconds on and 270 seconds off.
two. Clean all the hydraulic elements concerned ahead of set up of the electrical power unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst, which need to also be clean and free of impurities.N46 hydraulic oil is recommended.
four. This electrical power unit ought to be mounted horizontal.
5. Check the oil level from the tank immediately after the primary start out with the energy unit.
six. Oil shifting is required soon after the first a hundred operation hrs, afterwards after each and every 3000 hours.