Highest put on resistance accessible by sealing grease involving pins and bushings
The durability of chain is drastically enhanced given that grease is sealed involving the pins and bushings by O-rings. The O-ring chain may be the most dependable model of your Greatest Existence Chain Series with its exceptional dress in resistance even during the situations or environments the place chain maintenance is challenging.
Suggested utilizes.
?Situations wherever frequent chain replacement is required on account of put on stretch
?Circumstances in 
which lubrication through the service is unattainable
?In an surroundings with a lot soil, sand, dust, and so forth.
?Applications that require strength increased than that of a sintered bushing roller chain
Other capabilities
?Minimizing noise. (The noise degree is 3 dB reduced in contrast to conventional roller chains.)
?Cutting down vibration with the friction made by O-Ring. (The energy reduction because of the friction is almost negligible, because the frictional force concerning the pins and bushings is for generally during the applications.)
Variety of chains
The strength of an O-ring chain is almost the exact same as that of a typical roller chain. (Because the pins are longer than those of common roller chain, the typical rupture strength is somewhat lower.)
For deciding on an appropriate chain, refer to “Selection of Chains” .
When the support ambient temperature is higher than 80° C, distinctive heat resistant O-rings should be utilized. In this instance, contact us for far more details.
Connecting hyperlinks and offset backlinks
Two sorts of connecting links can be found: clearance fit and interference match. When substantial power or durability is required, use interference-fit connecting link. Only 2POJ is accessible because the offset website link for all sizes.
Sprockets
O-ring chain makes use of longer pins than a standard roller chain. When utilizing multiplex O-ring chain, the regular sprocket for multiplex chains cannot be employed.
Caution
O-ring chain is not really proposed in applications where solvents or other substances may well assault “Nitric Rubber”. Distinctive material O-rings are also obtainable for these circumstances: Please check with us for facts. Usually, “Nitric Rubber” is broken by contact with the following chemical resources.
